3-in-1 Water filling machine
3 in 1 water/syrup filling machine
Description
PRODUCT APPLICATION
The machine is suitable for automatic filling water, beverages and liquid attached with stickiness. The original filling equipment adds the plunger function, making it easier to fill liquid attached with stickiness into the bottle.
MAIN FEATURES
Adjustable filling speed
Accurate to ±0.4% (using drinking water as the test medium)
Integrated digital control with Siemens PLC, easy to operate.
Designed for easy replacement and cleaning.
Professional manufacturing technology using ISO-9001 system.
High-quality domestic motor-driven solid conveying system. Adjustable conveyor guide rails to adapt to different products.
GMP standard stainless steel. Drip drain back suction system.
The bottling mechanism can make the bottle in the best position before the filling action.
No bottle and no filling system. Bottle jam detection.
Schneider circuit breaker for overload protection.
Easy to install and operate, requiring minimal maintenance to achieve the best
performance and service life.
Exquisite packing structure, with high-quality finish, comparable to European machines.
The volume can be easily adjusted through the touch screen. The filling piston is controlled by a servo system.
Adjust the piston individually for fine adjustment.
The digital control system can perform multiple filling actions on the same bottle to achieve double, triple or even more times.
The nozzle automatically rises and can be adjusted on the touch screen.
The nozzle can be set above the mouth of the bottle or the bottom upwards, synchronized with the liquid level (below or higher than this height) to eliminate the foaming of the foam liquid.
The speed of filling is adjustable, you can fill slowly at the beginning, then accelerate to a faster speed, and finally decelerate again until completion. This will prevent the
foaming liquid from foaming and avoid overflow.
PARAMETER
Model | 14-12-5 |
Capacity | 2500~4000B/H (500ml PET standard bottle) |
Volume of PET bottle | 120ML-500ML |
Diameter of bottle | 50-90mm |
Height of bottle | 180-300mm |
Number of gas flushing heads | 14 |
Number of filling heads | 12 |
Number of capping heads | 5 |
Cap diameter | Plastic screw type cap diameter from 25-30mm |
Filling temperature | Normal temperature or ≤90 degrees |
Filling pressure | ≤0.15Mpa |
Filling accuracy | ±1% |
Gas consumption | 0.4m³ /min |
Machine weight | 2000kg |
Machine size | 3100*2320*1900mm |